Removing A Chassis Foot - NEC NEAX Express Service & Reference Manual

Removing a Chassis Foot

To remove a foot located on the left side of the chassis (as viewed from the front
of the chassis):
1. Power off the system and ensure it is disconnected from the ac wall outlet.
2. Remove the left-side panel of the chassis, see "Removing a Side Panel"
earlier in this section.
3. Locate the foot to be removed and press in on the two snap tabs securing the
foot to the chassis skirt.
4. Raise the chassis skirt up and remove the foot from the bottom of the skirt.
Removing a Foot on the Left Side of the Chassis
Disassembly and Reassembly 4-39