Figure 3-10 Holiday Setup Screen; Figure 3-11 Time Sync Screen - Honeywell HRHD4+ User Manual

Configuration
To save your changes, highlight OK and then press # . Select Cancel to exit the screen
without saving the changes.
On the Date/Time screen, highlight the box beside Time Sync ... and then press # to
display the Time Sync screen. Use the Time Sync screen to set up time synchronization
between the DVR and standard time servers that are available in most time zones and
countries, or between two DVRs.
Highlight the box beside Automatic Time Sync to toggle between On and Off.
Highlight the box beside SNTP Server and then press # . Change the numbers by
highlighting them and using the Up and Down Arrow buttons or the Jog Dial to increase
or decrease the number.
Highlight the box beside Interval and then press # . Set the time interval for
synchronization from 30 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server. To update the
server clock, highlight Update then press # .
Rev 3.01
Figure 3-10 Holiday Setup Screen
Figure 3-11 Time Sync Screen
30 Document 900.0258
10/05