Trip Computer And Warning System - Renault Modus Handbook

TRIP COMPUTeR: general information
1
Trip computer and warning
system 1
Depending on the vehicle, this includes
the following functions:
– distance travelled;
– journey parameters;
– information messages;
– operating fault messages (con-
©
nected to the warning light);
– warning messages (connected to the
®
warning light ).
All these functions are described on the
following pages.
1.52
(1/2)
Display selection keys 2
and 3
Scroll through the following informa-
tion in this order or reverse the order by
briefly pressing the key repeatedly.
a) Total mileage and trip mileage re-
corder,
b) journey parameters:
– fuel used,
– average fuel consumption,
– current fuel consumption (de-
pending on vehicle),
– estimated range,
– distance travelled.
c) mileage before service,
d) programmed speed (speed limiter/
cruise control),
2
e) on-board log: operating fault and in-
formation message readout.
Instrument panel in miles
It is possible to switch to km/h.
With the ignition on, press either
button 2 or 3 and turn the key to the ac-
3
cessories position.
The speed measurement unit indica-
tor flashes for approximately three sec-
onds, then the new unit flashes on the
display and is then lit up continuously:
release button 2 or 3.
To return to the previous mode, repeat
the operation.
Note: once the battery is switched off,
the trip computer and warning system
automatically returns to the original unit
of measurement.