Speed Limiter - Renault Modus Handbook

CRUISE CONTROL/SPEED LIMITER: limiter function
Limit speed cannot be maintained
In some driving conditions (for example
when driving up or down a steep gradi-
ent), the system is unable to maintain
the limit speed: the stored speed on the
instrument panel information display
will flash to inform you of this situation.
Putting the function on
standby
The speed limiter function is interrupted
when you:
– press switch 4 (O);
– engage reverse gear.
In both cases, the speed is memorised
and the speed displayed on the instru-
ment panel appears in brackets to con-
firm the function is on standby.
The speed limiter function is
in no way linked to the brak-
ing system.
2.22
2 3 4
Recalling the limit speed
A stored speed can be recalled by
pressing switch 5 (R) until the message
"Speed limiter" is displayed.
When the speed limiter is sus-
pended, pressing switches 2 (+)
or 3 (-) reactivates the function with-
out taking into account the stored
speed: it is the speed at which the
vehicle is moving that is taken into
account.
(3/3)
5
Switching off the function
The speed limiter function is interrupted
when you press:
– switch 4 (O), in which case the limit
speed remains stored and the mes-
sage "Stored" appears on the instru-
ment panel,
– switch 1, in which case the limit
speed is no longer stored, and the in-
dicator light on the instrument panel
goes out to confirm that the function
has been cancelled.
1
1