Closing the bonnet
Before closing the bonnet, make sure
that nothing has been left in the engine
To close the bonnet, replace stay 4 in
holder 5. Hold the middle of the bonnet
and guide it down to one foot (30 cm)
above the closed position, then re-
lease. It will latch automatically under
its own weight.
After carrying out any work
in the engine compart-
ment, check that nothing
has been left behind (cloth,
These may damage the engine or
cause a fire.
Ensure that the bonnet is
Check that nothing is pre-
venting the catch from lock-
ing (gravel, cloth, etc.).