Renault Modus Handbook page 59

TRIP COMPUTeR: general information
Resetting the trip mileage
With the "trip mileage recorder" se-
lected on the display, press and hold
button 2 or 3 until the mileage recorder
is reset.
Resetting the journey
parameters (reset button)
With one of the trip parameters selected
on the display, press button 2 or 3 until
the display is reset.
(2/2)
Interpreting some of the
values displayed after
resetting
2
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing the
reset button you may notice:
– that the range increases as you
3
travel.
This is normal, as average fuel con-
sumption may decrease when:
– the vehicle stops accelerating;
– the engine reaches its operat-
ing temperature (if the engine
was cold when reset button was
pressed);
– when driving from a built-up area
onto the open road.
– You may also notice that the aver-
age fuel consumption increases
when the vehicle is stationary and
the engine idling.
This is normal, since the computer
takes account of fuel used during
idling.
Automatic resetting of the
journey parameters
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.
1.53