CRUISE CONTROL/SPEED LIMITER: cruise control function
1
Switching on
Press switch 1 on the side showing
Ï
.
The corresponding warning light on the
instrument panel comes on to indicate
that the cruise control function is in op-
eration.
When the function is activated, the
message "Cruise control" appears on
the instrument panel accompanied by
dashes.
2.24
4
2
3
Activating cruise control
At a steady speed (above 20 mph (30
km/h)), press switch 2 (+) or 3 (-): the
function is activated and the speed is
stored.
When the cruise control function is ac-
Œ
tivated, the
indicator light on the
instrument panel is surrounded by a
border.
(2/4)
Driving
Once a cruising speed is stored and
the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
5
Important: you are never-
theless advised to keep
your feet close to the pedals
in order to react if neces-
sary.
The system is designed in such a
way that it is possible to detect a dif-
ference between the programmed
speed and the speed shown on the
instrument panel.
Need help?
Do you have a question about the Modus and is the answer not in the manual?