Trip Computer And Warning System - Renault Clio 2007 Owner's Manual

TRIP COMPUTER AND WARNING SYSTEM

1
2
Display 1
General reset and trip
mileage recorder reset key 2
To reset the trip mileage recorder, the
display must show the Trip mileage re-
corder.
1.44
Display selection key 3
Press button 3 repeatedly to scroll
through the following information:
a) total mileage recorder,
b) trip mileage recorder,
c) fuel used,
d) average fuel consumption,
e) current fuel consumption,
f) estimated range,
g) distance travelled,
3
h) average speed,
i) programmed speed (speed limiter/
cruise control).
Refer to the table on the following page
for display examples.
Interpreting certain values
displayed after a reset:
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you have travelled since the
last time the reset button was pressed.
For the first few miles after pressing the
reset key you will notice:
– that the range increases as you
travel. This is normal, as average fuel
consumption may decrease when:
– the vehicle stops accelerating,
– the engine reaches its operating
temperature (engine cold when
reset button pressed),
– driving from a built-up area onto
the open road.
Therefore, if the average fuel con-
sumption decreases, the range
will increase.
– You may also notice that the average
fuel consumption increases when the
vehicle is stationary and the engine
idling.
This is normal, since the computer
takes account of fuel used during
idling.
Note: when the maximum capacity of
any of the memories is exceeded, the
system automatically resets.