Trip Computer And Warning System - Renault Modus Manual

TRIP COMPUTER AND WARNING SYSTEM

1
Trip computer and warning
system
This displays the
information on instrument panel
display 1 (position varies according
to vehicle):
- information messages (journey
parameters etc.);
- the operating fault
(generally linked to the
warning light);
- warning messages (linked to the
warning light).
1.58
Display selection keys 2 and 3
Scroll through
information in this order or reverse
following
order by briefly pressing the key
repeatedly.
a) Total
mileage recorder,
b) journey parameters:
messages
- fuel used,
- average fuel consumption,
- current
(depending on vehicle),
- estimated range,
- distance travelled.
2
3
the following
mileage recorder, trip
fuel consumption
c) mileage before service,
d) programmed speed
limiter/cruise control),
e) on-board log: a
information messages
operating fault messages stored
by the computer.
Instrument panel in miles
It is possible to switch to km/h.
With the ignition switched off, press
either button 2 or 3 and turn the key
to the accessories position.
The speed measurement
indicator flashes for approximately
three seconds, then the new unit of
measurement flashes on the display
and then is displayed permanently.
Release button 2 or 3.
To return to the previous mode,
carry out the same operation.
Note: once the battery is switched
off, the trip computer automatically
returns to the original unit of
measurement.
(speed
record of
and
unit