Connecting The Peripherals; Figure 1-3. I/O Panel Controls, Connectors, And Indicators - Ampro ReadySystem 1U P/N 5001791A User Manual

Chapter 1

Connecting the Peripherals

7) Connect the Y-cable
and the respective
peripheral cables/
devices
COM 2
COM 1
COM 1/
COM 2
Serial 1 & 2
(Serial 1 Lower)
NOTE
ReadyBoard models with only one Ethernet connector (LAN 1)
have a cover over the LAN 2 Port.
4
• This includes the Y-cable for the PS/2 keyboard & mouse.
Refer to Figure 1-3 and Table 1-1 for location and description of the
connectors and controls.
• Connect the PS/2 Keyboard & Mouse Y-cable assembly to the
Keyboard/Mouse port on the ReadySystem 1U I/O Panel. See Figure 1-3.
This cable assembly provides two connectors for the PS/2 Keyboard and
PS/2 Mouse shared port with icons for the specific device.
• Connect the keyboard to the free Y-cable connector with keyboard icon
on it.
• Connect the PS/2 mouse to the Y-cable connector with the respective
mouse icon.
• Connect the CRT (VGA) monitor through its 15-pin cable to the CRT
(VGA) connector on the I/O Panel of the ReadySystem 1U. See Figure 1-3.
MIC LINE IN LINE OUT
CRT
COMPACT FLASH
CRT Compact Flash
(VGA)
Slot Cover
LAN1/
LAN2
Typical ReadyBoard (Side view)
CRT Ethernet 1 Ethernet 2
Compact Flash Socket

Figure 1-3. I/O Panel Controls, Connectors, and Indicators

Users Guide
Setting Up the ReadySystem 1U
USB2 USB3
RESET
Keyboard/
Mouse
USB 0/
USB 1
USB 0 & 1
(USB 0 Lower)
Power
LED
POWER
HDD
IDE
Activity
LED
Reset
Switch
Keyboard/
Mouse
Reset
Switch
Power/IDE
Activity
LED
ReadySystem 1U