Figure 2-7. Readyboard Positioned Under Lan Ports; Figure 2-8. Installing Readyboard Into Enclosure - Ampro ReadySystem 1U P/N 5001791A User Manual

Chapter 2
7. Position the ReadyBoard near the eight standoffs on the enclosure base at about a 10° angle to the
mounting surface. See Figures 2-7 and 2-8.
8. Insert the ReadyBoard and its LAN connectors just under the lip of the LAN port on the
enclosure wall, behind the I/O panel. See Figure 2-7.
9. Slowly work the ReadyBoard into place, inserting the I/O connectors and LEDs into the
respective openings on the I/O Panel.
When you have the ReadyBoard in position you should clearly see the mounting holes for the
eight standoffs under the board mounting holes, and the LEDs should fit into the openings
provided on the I/O Panel.
I/O Panel
ReadyBox 1U
Right Side View
14
Insert ReadyBoard
into enclosure just
above standoffs

Figure 2-7. ReadyBoard Positioned Under LAN Ports

M3x0.5 Screws (8)
6 mm Thread Length
with washers and
lock washers

Figure 2-8. Installing ReadyBoard into Enclosure

Users Guide
Installing ReadySystem 1U Options
ReadyBox 1U
Left Side View
ReadyBoard
Note: All standoffs have a
thread size of M3x0.5
and accept M3x0.5 screws.
I/O Panel
LAN Port
Lip
ReadySystem 1U