Configuration Notes; Reference Sources - Alcatel-Lucent 7750 SR OS Configuration Manual

Configuration Notes

The following information describes router configuration caveats.
•
•
•
•
•
•

Reference Sources

For information on supported IETF drafts and standards, as well as standard and proprietary
MIBS, refer to
7750 SR OS Router Configuration Guide
A system interface and associated IP address should be specified.
Boot options file (BOF) parameters must be configured prior to configuring router
parameters.
Confederations can be configured before protocol connections (such as BGP) and peering
parameters are configured.
IPv6 interface parameters can only be configured on systems provisioned with the iom2-
20g and 400g SFM2 card types.
In order to configure IPv6 interface parameters, the chassis mode must be set to c in the
config>system>chassis-mode context. Use the force keyword to upgrade to c mode with
cards provisioned as iom-20g or iom-20g-b.
An iom2-20g and a SFM2 card are required to enable the IPv6 CPM filter and per-peer
queuing functionality.
Standards and Protocol Support on page
IP Router Configuration
477.
Page 39