Service Management Tasks; Changing The System Name - Alcatel-Lucent 7750 SR OS Configuration Manual

Service Management Tasks

Service Management Tasks
This section discusses the following service management tasks:
•
•
•

Changing the System Name

The
syst
system name can be configured. If multiple system names are configured, the last one configured
will overwrite the previous entry.
Use the following CLI syntax to change the system name:
CLI Syntax: config# system
The following example displays the command usage to change the system name:
Example
The following example displays the system name change:
A:ALA-A>config>system# name TGIF
A:TGIF>config>system# info
#------------------------------------------
# System Configuration
#------------------------------------------
location "Mt.View, CA, NE corner of FERG 1 Building"
coordinates "37.390, -122.05500 degrees lat."
synchronize
snmp
----------------------------------------------
A:TGIF>config>system#
Page 76
Changing the System Name on page 76
Modifying Interface Parameters on page 77
Deleting a Logical IP Interface on page 78
em command sets the name of the device and is used in the prompt string. Only one
name system-name
: A:
ALA-A>config>system# name TGIF
A:
TGIF>config>system#
name "TGIF"
exit
security
snmp
community "private" rwa version both
exit
exit
. . .
7750 SR OS Router Configuration Guide