Configuring An Autonomous System - Alcatel-Lucent 7750 SR OS Configuration Manual

Configuring an Autonomous System

Configuring an autonomous system is optional. Use the following CLI syntax to configure an
autonomous system:
CLI Syntax: config>router
The following example displays the autonomous system configuration command usage:
Example:
The following example displays the autonomous system configuration:
A;ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "to-104"
#------------------------------------------
A:ALA-A>config>router#
7750 SR OS Router Configuration Guide
autonomous-system as-number
config>router# autonomous-system 100
config>router#
interface "system"
address 10.10.10.103/32
exit
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 100
router-id 10.10.10.103
IP Router Configuration
Page 75