Alcatel-Lucent 7750 SR OS Configuration Manual page 445

Table 20: CLI Commands to Configure Cflowd Parameters (Continued)
Command
protocol-port
raw
source-destination-
prefix
source-prefix
autonomous-system-type
description
no shutdown
7750 SR OS Router Configuration Guide
Specifies that flows be aggregated based on the IP protocol, source
port number, and destination port number.
Configures raw flow data to be sent in version 5.
Configures cflowd aggregation based on source and destination
prefixes.
Configures cflowd aggregation based on source prefix information.
Defines whether the autonomous system (AS) information included
in the flow data is based on the originating AS or peer AS.
Creates a text description stored in the configuration file for a
configuration context.
Administratively enables the cflowd collector.
Description
Cflowd
Page
467
467
468
468
468
468
469
Page 445