Pitch Adjustments; Pitch Slider - American Audio DCD-PRO1000 User Manual And Reference Manual

PITCH ADJUSTMENTS

PITCH ADJUSTMENTS:
The different pitch adjustments allow a track's or a loop's playback speed to be manipulated. This speed
manipulations is commonly used to beat match between two or more music sources such as a turntable or
another CD played. The playback speed may be increased or decreased by a factor of +/-100. The next section
details the different pitch manipulation schemes.
Figure 39
Activating the Pitch slider (18):
you must turn on the pitch adjustment function. Press the PITCH
ON/OFF BUTTON (17) located in the pitch control section of the
unit. The PITCH ON/OFF BUTTON (34) L.E.D. will glow when
the function is activated. If the pitch function is not activated the
PITCH SLIDER will not function.
American Audio
©

1. PITCH SLIDER (18):

This function will increase or decrease the tracks playback speed
or "PITCH." The maximum pitch percentage manipulation in this
function is +/-100%. The PITCH SLIDER is used to decrease or
increase the playback pitch. If the slider is move up (towards
the top of the unit) the pitch will decrease, if the slider is moved
down (towards the bottom of the unit) the pitch will increase. The
PITCH SLIDER adjustment can be changed to range from +/-
4%, +/-8%, +/-16%, or +/-100% (See changing "PITCH SLIDER
PERCENTAGE RANGE" on the next page). This pitch adjustments
will effect normal playback and loops only when the PITCH ON/
OFF BUTTON (26) is turned on. The pitch adjustments will not
affect your samples.
To activate the PITCH SLIDER
Using the Pitch slider (18):
been engaged as described above. To use the PITCH SLIDER
slide the slider up and down. Down will increase the pitch and
up will decrease the pitch.
Figure 41
- www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 27
®
Figure 40
Be sure the pitch function has