Pitch Adjustments; Pitch Slider - American Audio CK 1000Mp3 User Manual

PITCH ADJUSTmENTS

PITCH ADJUSTmENTS:
You can activate the pItcH SlIdEr (5) by pressing the pItcH on/off Button (6). When the button LED is
lit, the pItcH SlIdEr is active and the pitch can be adjusted. When the button LED is not lit pItcH SlIdEr is
not active. The different pitch adjustments allow a track's or a loop's playback speed to be manipulated. This
speed manipulation is commonly used to beat match between two or more music sources such as a turntable
or another CD player. The playback speed may be increased or decreased by a factor of +/-16. The next sec-
tion details the different pitch manipulation schemes.
Activating the PITCH SLIDER (5):
must turn on the pitch adjustment function. Press the on/off Button (6)
located at the top right of the unit. The on/off Button (6) LED will glow
when the function is activated. If the pitch function is not activated the pItcH
SlIdEr will not function.
©

1. PITCH SLIDER (5):

This function will increase or decrease the tracks playback speed or "PITCH."
The maximum pitch percentage manipulation in this function is +/-16%. The
pItcH SlIdEr (5) is used to decrease or increase the playback pitch. If the
slider is moved up (towards the top of the unit) the pitch will decrease, if the
slider is moved down (towards the bottom of the unit) the pitch will increase.
The pItcH SlIdEr adjustment can be changed to range from +/-4%, +/-8%,
or +/-16% (See changing "PITCH SLIDER PERCEnTAGE RAnGE" on the next
page). This pitch adjustments will effect normal playback and loops only when
the pItcH on/off Button (6) is turned on.
Figure 21
To activate the pItcH SlIdEr you
Using the PITCH SLIDER (5):
vated as described above. To use the pItcH SlIdEr slide the slider up and
down. Down will increase the pitch and up will decrease the pitch.
Figure 23
American Audio - www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 22
®
Figure 22
Be sure the pitch function has been acti-