Pitch Adjustments; Using The Pitch Slider Percentage Selector (8); Activating The Pitch Slider (5) - American Audio UCD-200 User Manual

P A
ITCH DJUSTMENTS
This function will increase or decrease a track's playback speed or "pitch", this is not a
momentary change as in "Pitch Bending". The maximum pitch percentage of the Pitch Slider
is +/-100%. The Pitch Slider (5) is used to decrease or increase the playback pitch. If the slider
is moved up (towards the top of the unit), the pitch will decrease, if the slider is moved
down (towards the bottom of the unit) the pitch will increase.
U P S
SING THE ITCH LIDER
P S
ERCENTAGE ELECTOR
You may choose a pitch operating
range at any time. To change the
operating range be sure the pitch
function is turned on, see Figure 10.
The pitch percentage can be
changed between +/-4%, +/-8%, +/-
16%, and 100%. 4% will allow the
least amount of pitch manipulation
and 100% will allow the most
amount of pitch manipulation.
To adjust the different values, press the Pitch ON/Off Button (8) and tap on the % button (8)
until your desired value is reached.
A P
CTIVATING THE ITCH
To activate the Pitch Slider (5), you
must turn the pitch function on.
Press the Pitch button (8) to turn on
the pitch function, when the pitch
function is activated LED will begin
to glow.
If the pitch function is not activated
the Pitch Slider (5) will not function.
©American Audio®
(8)
The LED of the % button (8) is glowing red for 4%,
glowing yellow for 8%, or glowing amber for 16%, and
all LEDs glowing for 100%.
S (5)
LIDER
www.americanaudio.eu UCD-200™ User Manual Page 30
Figure 10
Figure 11