Starting Playback; Pausing Playback - American Audio DCD-PRO1000 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)
3. STARTING PLAYBACK - Figure 10
Insert an audio CD as described on page 16 (LOADING/EJECTING
DISCS). Pressing the PLAY/PAUSE BUTTON (32) with an audio
CD loaded will immediately start playback. The PLAY (52) indica-
tor will glow as soon as playback begins. The point at which play-
back starts (cue point) will automatically be stored in the memory
as the cue point. The unit will return to this cue point (the point at
which playback started) when the CUE BUTTON (33) is pressed
and released.
4. AUTO CUE
This function will automatically set a cue point to the first audio source when a CD is loaded. The first set
cue point will always be the beginning of track 1. If a new track is selected before the PLAY BUTTON (32) is
pressed, a new CUE POINT will be set to reflect the new starting point.
6. PAUSING - Figure 10
This function pauses playback at the exact same point the PLAY/PAUSE BUTTON (32) was pressed. Pressing
the PLAY/PAUSE BUTTON (32) will switch between play and pause modes. When the unit is in pause mode the
PAUSE INDICATOR (59) in the LCD DISPLAY (34) and the green PLAY/PAUSE BUTTON (32) L.E.D. will begin
to flash repeatedly.
American Audio
©
5. STOPPING PLAYBACK - Figures 10 & 11
Stopping playback will not stop the drive mechanism, but merely
pause or cue the track, this function allows the unit to begin play
instantly. The drive mechanism will only stop if a disc is ejected or
the unit has gone in to sleep mode. There are two ways to stop
(pause) playback:
1) Press the PLAY/PAUSE BUTTON (32) during playback. This
will pause playback at the exact same point the PLAY/PAUSE
BUTTON (32) was pressed.
2) Press the CUE BUTTON (33) during playback. This will pause
playback and return the track to the last set cue point.
Figure 11
- www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 17
®
Figure 10