Changing Time Display - American Audio DCD-PRO1000 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)
Figure 34
TIME BAR INDICATOR - Details the time defined in the TIME METER (65, 66, & 67) as a visual bar icon. As
with the TIME METER (65, 66, & 67) this bar is also dependent on the selected time function TOTAL REMAIN
(58), OR REMAIN (58). This bar will begin to flash when a track is ending regardless
you are in. Use the flashing bar as a visual reminder that a track is ending.
American Audio
©
IN CUE MODE: While in cue mode and when the
touch sensitivity function is active, tapping on the JOG
WHEEL (20) can be used to start playback. The unit
will continue to playback until the JOG WHEEL (20) is
released. One the JOG WHEEL (20) is released the unit
will return to the last cue point.
Figure 33
15. CHANGING THE TIME DISPLAY (65, 66, & 67)\TIME
BAR (64):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON
(21), will change the time display information (65, 66, 67, & 64) in
the LCD (16) see figure 34. The following is a break down of the
time settings and their definitions:
1) ELAPSED (64) - This describes the time in the LCD (65, 66,
& 67) as the current TRACKS Elapsed running time.
2) REMAIN (58) - This describes the time in the LCD (65, 66,
& 67) as the current TRACKS remaining running time.
3) TOTAL REMAIN (58) - This describes the time in the LCD
(65, 66, & 67) as the disc total remaining running time.
- www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 25
®
of which time func
t on
i