Lcd Display - American Audio DCD-PRO1000 User Manual And Reference Manual

GENERAL FUNCTIONS AND CONTROLS (Cont.)
D. LCD DISPLAY PANEL (FIGURE 5)
52. PLAY INDICATOR - The "PLAY" indicator will
glow when the unit is in play mode.
53. TRACK INDICATOR - This 2-digit indicator
visually details the current track cued or playing.
54. VISUAL MARKER DISPLAY WITH 1:1 RATIO
- Indicates the direction the CD is rotating.
Counter-Clockwise rotation means the CD is play-
ing in reverse.
55. SINGLE INDICATOR - This indicates that the
CD drive is in single play mode, the track will play
once and return to CUE mode. If the single indi-
cator is not on the unit is in continuous mode In
continuous mode the drive will play all the remain-
ing tracks on the disc. Once the remaining tracks
have ended the unit will return to cue mode
56. LOOP - This icon will flash when you are in
loop mode. This icon will glow when a loop has
been created but is not actively playing.
57. RELOOP INDICATOR - Appears when LOOP
is engaged or ready to be engaged.
58. REMAIN INDICATOR - When "REMAIN"
is indicated in the LCD DISPLAY (34) the TIME
DESCRIBED (65, 66, & 67) in the LCD will define
the current track's remaining time.
58. TOTAL/REMAIN
"TOTAL" and "REMAIN"
LCD DISPLAY (34) the TIME DESCRIBED (54,
55, & 56) in the LCD (34) will define the total disc
remaining time.
American Audio
©
52
53
54
55
56
57
58
INDICATOR -
When
are indicated in the
- www.americanaudio.us - DCD-PRO1000™ Instruction Manual Page 15
®
59. PAUSE INDICATOR - This indicator will glow
when the drive is in pause mode.
60. MEMORY BUCKET INDICATOR - This indi-
cator serves two functions. The bucket outline
details the cue memory status, a full bucket
outline indicates the cue memory is full. The five
bars in the memory bucket detail the anti-shock
memory state. Each bar indicates 2 second of
digital anti-shock. The search functions will not
operate until all the bars are full.
61. CUE INDICATOR - This indicator will glow
when the unit is in CUE or mode and will flash
every time a new CUE POINT is set.
62. PITCH/BPM METER - This meter will dis-
play either the pitch percentage applied by the
PITCH SLIDER (18) or the BPM's.
63. BPM/PITCH INDICATOR - Indicator will light
up whatever is being displayed.
64. TIME BAR INDICATOR - This bar gives a
visual approximation of a track's or disc's remain-
ing time. This bar will begin to flash when a CD is
ending or a track if the unit is in "SINGLE" mode.
65, 66, 67. TIME DISPLAY - These indica-
tors detail the Minutes, Seconds, and Frames.
The meter will display either the elapsed, total,
or remaining time of a track or disc. The time
displayed in the meter will directly reflect the
time indicator above TOTAL REMAIN (58), OR
REMAIN (58).
59
60
61
62
Figure 5
63
64
65
66
67