Table of Contents
Advertisement
B.1
Disclaimer
We do not recommend using any ammonia or alcohol-based cleaners on the monitor
screen or case. Some chemical cleaners have been reported to damage the screen
and/or case of the monitor. Seller will not be liable for damage resulting from the use
of any ammonia or alcohol-based cleaner.
B.2
Troubleshooting
If your monitor fails to operate correctly, consult the following chart for possible solu-
tion before calling for repairs:
Condition
The picture does not
appear
The screen is not
synchronized
The position of the
screen is not in the
center
The screen is too
bright (too dark).
The screen is shak-
ing or waving
If you are unable to correct the fault by using this chart, stop using your monitor and
contact your distributor or dealer for further assistance.
FPM-8192V/8232V User Manual
Check Point
Check if the signal cable is firmly seated in the socket.
Check if the Power is ON at the computer
Check if the brightness control is at the appropriate position, not at
the minimum.
Check if the signal cable is firmly seated in the socket.
Check if the output level matches the input level of your computer.
Make sure the signal timings of the computer system are within the
specification of the monitor.
If your computer was working with a CRT monitor, you should check
the current signal timing and turn off your computer before you con-
nect the VGA Cable to this monitor.
Adjust the H-position, and V-position, or Perform the Auto adjust-
ment.
Check if the brightness or contrast control is at the appropriate posi-
tion, not at the Maximum (Minimum).
Perform the Auto adjustment..
Moving all objects which emit a magnetic field such as motor or
transformer, away from the monitor.
Check if the specific voltage is applied.
Check if the signal timing of the computer system is within the speci-
fication of monitor.
30
Advertisement
Table of Contents
