Beforecalling Forservice - Kenmore 911.49042 Use & Care Manual

30" convection self-cleaning single electric built-in wall oven
Hide thumbs Also See for Kenmore 911.49042:
Table of Contents

Advertisement

Available languages

Available languages

BEFORECALLING FORSERVICE
To save you time and money, before making a service call check the list below
for any problem you may feel you have with the performance
of your oven. If
the problem is something you cannot fix, use the Service Numbers
located at
the back of this manual. When making any calls, have the Model No., Serial
No., Repair Parts List and Use and Care Guide available.
PROBLEM
POSSIBLE
CAUSE
POSSIBLE SOLUTION
The display of
your control is
flashing "F"
followed by a
number or letter.
You have a function
error code.
Touch the CLEAR/OFF pad.
Restart the oven. If the function code
repeats, disconnect all power to the
oven for at least 30 seconds and
then reconnect power. If the function
error code repeats again, call for
service.
Oven and oven
control will not
work.
a. No power to oven.
b. The clock is in the
black-out mode.
Oven temperature
Oven control
seems inaccurate,
calibration.
Oven will not
Clean cycle is not
unlock,
finished. Oven is
too hot.
a. Check the circuit breaker or fuse.
Make sure the power cord is
plugged in.
b. See the "Setting Special Features"
section of this manual.
See the temperature adjustment
instructions following this section.
Oven temperature must drop below
the lock temperature before the door
will unlock.
Oven light does
a. Light switch in off
a. Check oven light switch on the
not work.
position,
control panel.
b. Oven light bulb
b. Check the oven light bulb.
loose or burned out.
Oven did not
a. Controls were not set
a.
clean or results
properly.
were poor.
b. Clean cycle was
b.
interrupted.
c. Oven was soiled
heavily.
C.
Check the self-cleaning
section of this manual.
Heavy spillovers should be
removed before the cycle is set.
Use the longest cycle, Hi, for the
heavily soiled oven.
The standard clean cycle is 4
hours, a Lo clean cycle is 3 hours
and a Hi clean cycle is 5 hours.
Fan noise.
A cooling fan or
a convection fan
(depending on the
function you are using)
may automatically
turn on.
This is normal. The cooling fan will
turn on to cool internal parts. It may
run for up to 1 1/2 hours after the
oven is turned OFF. The convection
fan will run until the function is over
or the door is opened.
34
20P309-3
ENv02
2/14/03, 2:50 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents