Oven Light Bulbs; Oven Racks - Kenmore 911.49042 Use & Care Manual

CAREAND CLEANING
Removable Parts
_ AUTION: You must
disconnect electrical
power to the oven at
the main circuit
breaker or fuse box before
attempting to replace oven light
bulbs. Do not touch the light
bulb with bare hands. The bulb
gets very hot very quickly. Wrap
cotton cloth or foam rubber from
bulb package around bulb when
installing. When removing the
bulb, wait until the bulb has
cooled and use a dry cloth.
To give you the best lighting available,
your oven has two halogen bulbs. Both
lights are on the ceiling of the oven cavity.
Receptacle Socket
Bulb with "'_'==_X
Wrap,> _',x_ ]BulbTab
,_sCover
REMOVE
TO
1.
2.
3.
TO
1.
2.
You must disconnect electrical power
to the oven at the main circuit breaker
or fuse box.
Turn the glass cover
counterclockwise 1/4 turn until
the tabs of the glass cover clear
the grooves of the socket.
Pull straight out to remove the bulb.
REPLACE
Wrap bulb with cotton cloth or bulb
packaging material. Don't touch bulb
with your fingers.
Push bulb straight into receptacle all
the way. Use only a 120-volt, 35-watt
halogen bulb.
3. Place the tabs of the glass cover into
the grooves of the socket.
4. Turn the glass cover clockwise
1/4 turn.
5. Reconnect electrical power to the
oven at the main circuit breaker or
fuse box.
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
• Scouring pad or soap-filled pad
Bump in I_ " '_:_ Hf!
Rack Guide _ iI_
Raised Back _ ][ii
of the Rack /Ili
TO REMOVE
1. Pull the racks out to the stop position.
2. Pull up the front of the rack and slide
under the bump of the rack guide.
TO CLEAN
Clean with warm water and detergent. For
hard-to-remove stains, gently scrub with a
scouring pad or a soap-filled pad. Rinse
well.
Gray porcelain-coated oven racks may
also be cleaned in the oven during the
self-clean cycle. It is necessary to wipe
the edges of gray porcelain-coated oven
racks with a light coating of vegetable oil
after cleaning. This will help maintain the
ease of sliding the racks in and out of the
oven.
TO REPLACE
1. Place the raised back of the rack onto
the rack guides.
2. Lift the front of the rack until the raised
back slides under the bump of the
rack guides.
3. Slide the rack all the way back.
32
20P309-3 ENv02 2/14/03, 2:50 PM