Before Calling Forservice - Kenmore 911.41885 Series Use & Care Manual

BEFORE CALLING FORSERVICE
To save you time and money, before making a service call check the list below
for any problem you may feet you have with the performance of your oven If
the problem is something you cannot fix, use the Consumer Service Numbers
located at the back of this guide When making any calls, have the Model
No., Serial No., Repair Parts list, Use and Care Guide and the Date of
Purchase available.
Oven malfunction
PROBLEM POSSIBLE CAUSE
i ,i, ,i ,, ,i ,, ,IIIMII,III !1,11,111111,11
The display of your
control is flashing "F"
followed by a number
or letter.
POSSIBLE SOLUTION
Press the CLEAR/OFF
pad Let the oven cool for
t hour and enter an oven
or cleaning operation If
code repeats, call for
service
Oven and oven
control will not work.
No power to oven.
Check the circuit breaker
or fuse Make sure the
power cord is plugged in
Oven temperature
seems inaccurate.
Oven will not
unlock.
Oven light will
not work.
The clock is in the
black-out mode
Oven control calibration
Clean cycle is not
finished
a. Light switch in off
position
See the "Setting Special
Features" section of this
guide.
See the temperature
adjustment instructions
following this section
Oven temperature must
drop below the lock
temperature before the
door will unlock
a=
b. Oven light bulb b.
loose or burned out
Oven did not clean
or results were poor.
a. Controls were not set a.
properly.
b. Oven was soiled b.
heavily
Check oven light
switch on the control
panel
Check the oven light
bulb
Check the self-cleaning
section of this manual
Heavy spillovers
should be removed
before the cycle is set
You can also repeat
the cycle after oven
has cooled
c. Clean cycle was
interrupted
c. The normal clean cycle
should last 4 hours
25