Using The Configuration Wizard - D-Link 2Voice + 4SW VoIP Router DVG-1402S Manual

Using the Configuration Wizard

Whenever you want to configure
your network or the DVG-1402S,
you can access the Configuration
Menu by opening the web-browser
and typing in the IP Address of the
DVG-1402S. The DVG-1402S
default IP Address is shown to the
right:
•
Open the web browser
•
Type in the IP Address of the
Router (http://192.168.15.1)
•
Type admin in the User Name
field
•
Type admin in the Password
field
•
Click OK
The Home > Wizard screen will appear.
Please refer to the Quick Installation
Guide for more information regarding the
Setup Wizard.
These buttons appear on most of the
configuration screens in this section.
Please click on the appropriate button at
the bottom of each screen after you have
made a configuration change.
Note: if you have changed the default IP
Address assigned to the DVG-1402S,
make sure to enter the correct IP
Address.
192.168.15.1
Clicking this button will save configured
settings to the router.
Clicking Cancel will clear changes made to
the current page.
Clicking Help will provide the user with
helpful information about
window.
Click refresh will refresh the statistics of the
current window.
the current
9