D-Link 2Voice + 4SW VoIP Router DVG-1402S Manual page 20

Server FQDN
IP Address
Domain Name
Port
Secondary SIP Server
Outbound Proxy
Service Domain
URL Format
User Parameter
Caller ID Delivery
Display CID
Timer T2
Initial Unregister
Register Expiration
Use this drop-down menu to Enable or Disable the Server
Fully Qualified Domain Name (FQDN) function. This is
disabled when the SIP URL domain name is different from
the SIP proxy server domain name. The phone will then use
the domain name in Domain Name field as part of SIP URL
but send and receive SIP messages through the SIP proxy
server defined in the Service Domain field.
Enter the IP address of the SIP Server in this field.
Enter the domain name corresponding to the IP address
entered above in this field.
Enter the SIP server's listening port for the SIP in this field.
Leave this field set to the default if your VoIP service
provider did not give you a server port number for SIP.
The Secondary Features (FQDN, IP address, domain name
and port), act as a backup for the initial connections' settings.
In the event that the connection with the SIP server is lost,
the backup settings will be used.
The Outbound Proxy is a normal SIP proxy. If instructed to do so
by your ISP, enable the Outbound Proxy, and enter its IP address,
Domain Name and Port Number in the appropriate fields.
Enter the SIP service domain name in this field.
Select SIP-URL to have the router include the domain name
with the SIP number in the SIP messages that it sends.
Select TEL-URL to have the router use the SIP number
without a domain name in the SIP messages that it sends.
You can set this to phone or none.
whether or not the phone number is appended to the
information forwarded to your SIP server.
service provider will instruct you which setting to use.
Use this pull-down menu to initiate the delivery of the
inbound caller ID.
Use this pull-down menu to enable or disable the display of
the Caller ID.
Set the timer to 4, 8, 16 or 32.
Enable or disable the initial unregister.
Use this field to set how long the router will wait before
sending a repeat registration request if a registration attempt
fails or there is no response from the registration server.
This determines
Your VoIP
19