Advanced > Routing - D-Link 2Voice + 4SW VoIP Router DVG-1402S Manual

Advanced > Routing > Static Route
The Routing table, shown to
the right, allows you to enter
static routes between
computers on both the WAN
(Internet) and your LAN.
IP Address
Subnet Mask
Gateway
Interface
Metric
State
Enter the IP Address of the subnet or device where packets are
to be routed.
Enter the subnet mask corresponding to the IP address entered
above
.
Enter the IP address of the gateway used for packets that are
to be routed to the IP address entered above.
Select the WAN (Internet) or LAN interface.
Enter the number of hops (the number of routers) that packets
will be allowed to cross when being routed to the IP address
entered above.
Use this drop-down menu to Enable or Disable this route.
43