Running The Mc_Cable Test - Compaq TruCluster Server AA-RHGWB-TE Manual

Example 5–1: Running the mc_cable Test
>>> mc_cable
To exit MC_CABLE, type <Ctrl/C>
mca0 node id 1 is online
No response from node 0 on mca0
mcb0 node id 1 is online
No response from node 0 on mcb0
Response from node 0 on mca0
Response from node 0 on mcb0
mcb0 is offline
mca0 is offline
Ctrl/C
>>>
The mc_cable diagnostic is initiated on node 1.
1
Node 1 reports that mca0 is on line but has not communicated with the
2
Memory Channel adapter on node 0.
Node 1 reports that mcb0 is on line but has not communicated with the
3
Memory Channel adapter on node 0.
Memory Channel adapter mca0 has communicated with the adapter
4
on the other node.
Memory Channel adapter mcb0 has communicated with the adapter
5
on the other node.
Typing a Ctrl/C on node 0 terminates the test on that node and the
6
Memory Channel adapters on node 1 report off line.
A Ctrl/C on node 1 terminates the test.
7
Setting Up the Memory Channel Cluster Interconnect 5–13
1
2
2
3
3
4
5
6
6
7