Placing The Ups In Operate Mode - Compaq 2000 Series UPS Operation And Reference Manual

2-10 Compaq 2000 Series UPS Operation and Reference Guide

Placing the UPS in Operate mode

Press and hold the ON button ( ) until the LED 16 ( , ON LED) turns green,
indicating that power is available at the UPS output receptacles. The UPS will
acknowledge compliance with a short beep.
Figure 2-6. Operate mode controls
ON LED
ON button
STANDBY button
The Installation is Now Complete
For information on operating the UPS, see Chapter 3, "Operation."
For information on changing the configuration of the UPS, see
Chapter 4, "Configuration."
Use the Compaq website as an additional information source:
http://www.compaq.com
1
2
3