2-10 Compaq UPS T2200 XR Operation and Reference Guide
Placing the UPS in Operate mode
Press and hold the ON button (2) until the Utility LED (1) turns solid green,
indicating that power is available at the UPS output receptacles. The UPS will
acknowledge compliance with a short beep.
2
Figure 2-5. Placing the UPS in Operate mode
1
Utility LED
2
ON button
Installation is Now Complete
For information on operating the UPS, see Chapter 3, "Operation."
For information on changing the configuration of the UPS, see
Chapter 4, "Configuration."
Use the Compaq website as an additional information source at
www.compaq.com/ups.
1