Step 2: Removing The External Battery Module - Compaq 2000 Series UPS Operation And Reference Manual

5-6 Compaq 2000 Series UPS Operation and Reference Guide

Step 2: Removing the External Battery Module

Use this procedure to remove the external battery module:
1. Disconnect the battery cables from the UPS.
CAUTION: It is normal for a small amount of electrical arcing to occur when
disconnecting an external battery module from a UPS. To minimize the amount
of arcing, remove the battery cables quickly and firmly.
PO RT
CO MM .
Battery
Module
Figure 5-2. Disconnecting an external battery module
2. Set the used external battery module aside to install the replacement
module.
CAUTION: Load devices will not be protected from utility power failure until the
battery module is successfully replaced.
PO RT
CO MM .