Step 3: Installing A New Battery Module - Compaq 2000 Series UPS Operation And Reference Manual

Step 3: Installing a New Battery Module

Connect the battery cables from the new external battery module to the battery
receptacle on the UPS.
CAUTION: It is normal for a small amount of electrical arcing to occur when
connecting an external battery module to a UPS. To minimize the amount of
arcing, insert the battery cables into the receptacles on the UPS quickly and
firmly.
Battery
Module
Figure 5-3. Connecting an external battery module
If the installation has been successful, the green Battery Charge indicators
(LEDs 6 to 8) show that the UPS is charging the batteries. This means that the
installation is now complete.
PO RT
CO MM .
Battery Maintenance 5-7