Mx-Amx1 (Application Integration Module) - Sharp MX 4501N - Color Laser - All-in-One Installation Manual

MX3500N
[12] MX-AMX1
1. Unpacking
A. Parts included
1 2
No. Packed part names
1 CD-ROM
2 MX-AMX1 GETTING STARTED GUIDE
3 Sharpdesk license kit Operation Manual
2. Installation
<Note before installation>
• To enable the Application Integration Module function, the prod-
uct key must be acquired.
• The network scanner expansion kit must be installed in advance.
The installing procedure differs depending on the destination.
To install the network scanner expansion kit, refer to the descrip-
tions for the "[14] Network scanner expansion kit (MX-NSX1)" in
this Service Manual.
A. Make preparations to enable the Application
Integration Module function.
1) To enable the Application Integration Module function, enter
the product key by the key operation of the operation panel.
a) Touch [Product Key].
b) Enter the product key with the 10-key, and touch [Enter] key.
2) After completion of the product key entry, turn OFF the power
switch and the main power switch of the machine, and turn
them ON again. (For the models with the main power switch
only, turn OFF/ON the main power switch only.)
B. Check the operation of the Application
Integration Module function.
1) Send image data and meta data by referring to MX-AMX1
GETTING STARTED GUIDE (package part No. 2). Check to
confirm that image data and meta data are properly received.
Service Manual
3
Quantity
2
1
1
MX3500N MX-AMX1 12 – 1