3)
Remove two screws which are fixing the paper entry paper
guide.
4)
Remove the hook (boss) on the upper side of the paper entry
paper guide.
5)
Remove the hook (boss) on the upper side of the paper entry
paper guide with a screwdriver.
6)
Remove the paper entry paper guide.
7)
Install the paper entry paper guide exclusively used for the
MX-FNX2 packed with the saddle finisher.
1
8)
Fix the incoming paper guide using the screws removed in
step 2.
9)
Replace the dust box to the original position.
10) Install the punch unit and fix it with the screws. Connect the
connector.
Fixing
screw
Punch unit
MX3500N AR-PN1A/B/C/D 8 – 3
Boss hole
Boss
Boss
Fixing screw
Fixing screw
(M4 x 6 with
tooth lock washer)
2
Boss hole