Sharp Osa; Application Communication Module (Mx-Amx2) - Sharp MX-2314N Operation Manual

Digital full colour multifunctional system

Hide thumbs Also See for MX-2314N:

Table of Contents

SHARP OSA

(On the MX-2314N, the productivity kit is required.)

Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to

a digital multifunction machine over a network.

When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the

machine such as scan send can be linked to an external application.

There are two types of external applications: "standard application" and "external account application". An "external

account application" is used for centralized account management of a multifunction machine on a network. A "standard

application" refers to all other applications.

The application communication module is required to use a "standard application" on the machine.

When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves

the operation screen from the registered URL. Control of the operation screen is performed by the standard application,

and Scan to FTP, Scan to Network Folder, and HTTPS transmission can be executed.

Standard application setup

To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu

frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard

application in the screen that appears.

Selecting a standard application

The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained

Ready to scan for copy.

Special Modes

2-Sided Copy

Paper Select

BEFORE USING THE MACHINE

Touch the [Sharp OSA] key in the mode

select keys.

If no standard applications have been stored in the Web pages,

the key cannot be touched.

Mx-2614n Mx-3114n