Sharp MX 4501N - Color Laser - All-in-One Installation Manual page 40

2) Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
3) Remove the earth cord and disconnect the power plug of the
main unit from the power outlet.
B. Installation of the punch unit
1) Open the front cabinet.
2) Open the front lid, and slide the inner finisher.
3)
OFF
4)
5)
6)
2
MX3500N MX-PNX1A/B/C/D 6 – 2
Remove the coin screw, and remove the finisher slide stopper.
Slide the inner finisher further more.
Remove two screws, and remove the front cabinet upper.
Remove the screw, and remove the band and the punch cover.