Konica Minolta bizhub 160 Service Manual page 139

12. Service Mode (bizhub 160/bizhub 161)
E. FLS PAPER SIZE
Functions • To specify the paper size for foolscap.
Use • When the FLS paper size has been changed
• Upon setup
Setting/Procedure • The default setting is "330∗210."
F. GDI TIMEOUT
Functions / Use • To specify the time for GDI time out.
• bizhub 160 only.
Setting/Procedure • The default setting is "6" (60 seconds).
G. TONER EMPTY STOP
Functions / Use • To select if copy operations are stopped when the toner becomes empty.
Setting/Procedure • The default setting is "ON."
• If "OFF" is selected, operations are not stopped when the toner becomes empty.
H. PRE-ROTATION
Functions / Use • To select if the pre-rotation operation for the Fusing Roller is performed when the
Setting/Procedure • The default setting is "ON."
• If "OFF" is selected, the length of time until the first copy can be printed is
I. FUSER TEMP.Ad
Functions • To specify the fusing temperature when using plain paper (more than 186 mm).
Use • When a fusing failure has occurred
Setting/Procedure • The default setting is "0."
106
330∗203
0 (5sec) 1 (10sec)
4 (40sec) 5 (50sec)
"ON"
Start key is pressed.
"ON"
shorter.
"0" (Standard)
Field Service Ver. 1.0 Apr. 2005
"330∗210" 330∗216
2 (20sec) 3 (30sec)
"6" (60sec)
OFF
OFF
1 (Higher)
337∗206