Scsi Parity Checking Selections - Acer M9N System User Manual

SCSI PARITY CHECKING
Select this option to enable or disable the SCSI parity checking
function on the SCSI controller. Figure 5-4 displays the selections.
The default setting is Enabled .
Figure 5-4

SCSI Parity Checking Selections

The SCSI controller always checks parity when reading from the
SCSI bus to verify the correct transmission of data from the SCSI
devices. You should disable the SCSI Parity Checking parameter if
any of the installed SCSI devices does not support SCSI parity. Most
currently available SCSI devices support this feature.
Use the or keys then press to select options. Press
at anytime to return to the previous menu.
System Utilities 5-9