Table of Contents
Advertisement
Windows NT
While running Windows NT:
1
From the Control Panel, double-click the Intel PROSet icon.
2
PROSet examines your system and displays the Adapter Setup
window. If you have multiple adapters, click the "Show All
Adapters" box and then select the adapter you are configuring (it
can be identified by its Ethernet address). Each adapter must be
configured separately. See page 10, Installing Multiple Adapters,
for more information.
3
From the window that appears, click Change.
4
From the Adapter Setup window, click the menu for Network
Speed.
5
Click 100 or 10 Mbps, depending on hub speed.
6
Click the menu for Duplex Mode
7
Click Full.
8
Click OK when finished.
9
Click Restart Windows NT.
Windows 95
While running Windows 95:
1
From the Control Panel, double-click the Intel PROSet icon.
2
PROSet examines your system and displays the Adapter Setup
window. If you have multiple adapters, click the adapter you are
configuring (it can be identified by its Ethernet address). Each
adapter must be configured separately. See Installing Multiple
Adapters for more information.
3
From the window that appears, click Change.
LAN Information
4-15
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the M9N System and is the answer not in the manual?
Questions and answers