Maintenance Menu Operations - Sony XDS-PD1000 Operation Manual

Item
M5F: RESET NET CONFIG
a) A "jumbo" frame is a frame larger than the maximum 1514 bytes (not
including FCS) of the standard Ethernet frame. Jumbo frames make it
possible to deliver larger payloads per packet. Since fewer packets need to
be routed, packet processing overhead is lower and network throughput is
Item
D0: DRIVE MAINTENANCE
D1: SSD/HDD
D11: RAID
D13: FORMAT

Maintenance menu operations

This section describes the indications in the maintenance
menu and how to change the settings.
To display the maintenance menu
Holding down the PAGE/HOME button and the SHIFT
button, press the MENU button.
The maintenance menu appears on the video monitor
screen and the currently-set menu item is displayed in
reverse video.
Meanings of indications on the menu
screen
On-screen indication
Right-pointing arrow
(c) at the right of a
menu item
Left-pointing arrow (C)
at the left of a menu
item
Character string at the
right of a menu item
An * (asterisk) in a
complete list of settings
126
Maintenance Menu
M5: NETWORK: Items relating to network settings
Setting
Reset network settings to the factory defaults.
Push the SAVE function button (F5): Reset.
Push the MENU button: Return to the next highest menu level without executing the
reset.
M6: DRIVE: Items relating to drive settings
Setting
Perform maintenance on the Professional Disc drive.
Specify whether to install the optional XDBK-102.
on: Install.
off: Do not install.
Format (initialize) the internal storage.
Push the SAVE function button (F5): Format (initialize).
Push the MENU button: Return to the next highest menu level without executing the
format.
Meaning
Pressing the PUSH SET knob or
the b button switches to the next
lower menu level or to a setting
selection screen.
Pressing the PUSH SET knob or
the B button switches to the
previous (higher) menu level.
Current setting of the menu item
When shown with a colon (:): the
current setting is the same as
the factory default setting.
When shown with a raised dot
(.): the current setting is
different from the factory
default setting.
Factory default setting
potentially improved. (Note that this item is enabled only when LINK
SPEED is set to "1Gbps FullDuplex". For it to work, all other devices that
handle packets on the network must also support jumbo frames.)
To change a menu item setting
Carry out the following operations to change the setting.
For information about how to change network settings see
next section "To change network settings".
MENU button
Function buttons
SHIFT button
PAGE/HOME button
1
Use the PUSH SET knob or the V and v buttons to
select the required item, then press the PUSH SET
knob or the SELECT function button (F2).
The sub-items of the selected item appears.
2
Select a sub-item with the same operation as step 1,
and use the PUSH SET knob or the V and v buttons to
change the setting.
3
Press the PUSH SET knob or the SELECT function
button (F2) to confirm the setting change.
Arrow buttons
PUSH SET knob