Sony XDS-PD1000 Operation Manual page 139

Alarms relating to the internal storage
Alarm message in status Alarm message in video monitor screen Description/action
display area
HDD(1/2/3) Warning ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING HDD NUMBER (1/2/3).
PLEASE CONTACT SERVICE.
HDD(1/2/3) Fail HDD(1/2/3) FAIL.
PLEASE CONTACT SERVICE.
SSD(1/2/3) Warning ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING SSD NUMBER (1/2/3).
PLEASE CONTACT SERVICE.
SSD(1/2/3) Lifetime SSD (1/2/3) LIFETIME HAS ENDED.
PLEASE CONTACT SERVICE.
SSD(1/2/3) Fail SSD (1/2/3) FAIL.
PLEASE CONTACT SERVICE.
Rebuilding xx% REBUILDING NOW.
PLEASE DO NOT TURN OFF.
CONFIG MIS INTERNAL STORAGE CONFIGURATION
MISMATCH.
Low Remaining Capacity –
Other alarms
Alarm message in status Alarm message in video monitor screen Description/action
display area
Turn off/on POWER!! SYSTEM CONFIGURATION WAS
CHANGED.
PLEASE TURN OFF/ON POWER.
Turn off/on POWER!! MENU CONFIG WAS CHANGED.
PLEASE TURN OFF/ON POWER.
Format Media is –
Prohibited.
Confirm Mainte Menu:
M395.
Cannot finalize this Disc. –
It is available for QL-WO
disc only.
Errors are occurring frequently when reading or
writing an HDD (1, 2, or 3). The HDD must be
replaced.
Contact your Sony service or sales representative.
An HDD (1, 2, or 3) had malfunctioned. The HDD
must be replaced.
Contact your Sony service or sales representative.
Errors are occurring frequently when reading from or
writing to SSD (1/2/3). The SSD must be replaced.
Contact your Sony service or sales representative.
The lifetime of SSD (1/2/3) has come to an end. The
SSD must be replaced.
Contact your Sony service or sales representative.
The SSD (1/2/3) malfunctions. The SSD must be
replaced.
Contact your Sony service or sales representative.
Data is being rebuilt.
Do not power the unit off until the rebuild has finished.
Check whether the required number of SSD/HDD is
installed. If that does not solve the problem, contact
your Sony service or sales representative.
The internal storage has low remaining free space.
Delete any unwanted clips.
The system frequency was changed.
Power off this unit and then power it on again.
Menu settings were changed.
To put the change of menu settings into effect, power
this unit off and then power it on again.
An attempt has been made to execute Format Media
when the Format Media command is disabled by
maintenance menu Item M395.
Check maintenance menu item M395.
An attempt has been made to finalize a disc that
cannot be finalized.
Only quad-layer discs can be finalized.
139
Troubleshooting