Recording/Playback Format - Sony XDS-PD1000 Operation Manual

Note
The remaining capacity of recordable resource space is not
the same as the remaining recording capacity. When there
is no available recording resource space is left on the disc,
file writing may be disabled even with sufficient available
storage remaining.
e Recording/playback format
In 1-in/1-out mode, this displays the recording format
when a record port is selected or the playback clip format
when a playback port is selected. In VTR mode, this
displays the format of the clip being played.
f Clip information
Displays clip information. The display varies depending
1)
on the clip playback mode.
1) The clip playback mode setting is switched using maintenance menu item
M397 PORT CONFIGURATION.
In 1-in/1-out mode
Clip name
Duration
Clip number/total number of clips
During playback, the icons in the following table appear to
indicate the properties that have been set in a clip.
Icon Description
Copy restricted
An OK flag is set
An NG flag is set
A KEEP flag is set
A shot mark is set
The clip is locked (protected)
Codec
Video format
System frequency
Audio format
System frequency
Property icons
In VTR mode
Clip number/total number of clips
Clip name
Clip format
(Codec, video format, System frequency,
Audio format)
g Operation status display
Displays icons indicating the operation status of this unit.
Icon Description
1080/720 cross-convert output
Repeat playback
Recording to internal storage
Chase playing internal storage
h Time data display area
A Remaining media capacity for recording or playback
B REC RUN/FREE RUN
C Timecode generator mode
D VITC
F Time data
E Time data type
A Remaining media capacity for recording or
playback: Displays the amount of remaining capacity
for recording or playback on the media.
B REC RUN/FREE RUN: Displays the timecode run
mode. The run mode is set with RUN MODE on page
P4 TC of the function menu (see page 47).
C Timecode generator mode: Displays the timecode
source and generation method (preset or regenerate).
These are set with TCG and PRST/RGN on page P4
TC of the function menu (see page 47).
D VITC: Lights in the following cases.
• When VITC is read in playback mode. (This has no
relations to the display in the time data display
area.)
• When VITC recording is possible.
Duration
G DF/NDF
indication
G DF/NDF
(TCG)
indication
(TCR)
Front Panel
23