Chapter 4 Recording, Playback And Copying; Recording; Preparations For Recording; Carrying Out Recording - Sony XDS-PD1000 Operation Manual

Recording, Playback and
Copying

Recording

This section describes video and audio recording on the
unit.
See page 45 "Basic Operations of the Function Menu" for
more information.
See page 99 "Menus" for more information about setup
menu operations.

Preparations for recording

Make the following settings and adjustments before
starting to record.
Video input signal selection: Select with V INPUT on
page P1 INPUT of the function menu.
Audio input signal selection: Select with A1 INPUT to
A4 INPUT on page P1 INPUT and A5 INPUT to A8
INPUT on page P2 INPUT of the function menu.
Timecode and user bits settings: See "Setting timecode"
(page 40).
Selection of time data to display: Select with CNTR SEL
on HOME page of the function menu.
Selection of audio channels to monitor: Select with
MONITR R and MONITR L on the HOME page of
the function menu.
Volume adjustment of the monitor audio: Adjust with
the LEVEL adjustment knob.

Carrying out recording

When recording with this unit, you can perform normal
recording or simultaneous recording.
Normal recording
Records to internal storage or Professional Disc
Simultaneous recording
Records simultaneously to internal storage and
Professional Disc, or internal storage and SxS memory
card.
Note
Simultaneous recording is disabled when maintenance
menu item M397 PORT CONFIGURATION is set to
"VTR Mode."
One recording segment (from the start to the end of
recording) is called a "clip".
When recording to the internal storage, the maximum
recording time for one clip is six hours.
For the available recording time of each media, see
"Recording and playback time" under "Specifications"
(see page 141).
PD2000
1)
When recording in XAVC format to Professional Disc, the content must
also be simultaneously recorded to internal storage. Recordings to
Professional Disc are recorded in the UserData directory. Note that clips
cannot be recorded simultaneously to SxS memory card and internal
storage in XAVC format.
If the clip list screen is displayed, press the THUMBNAIL
button to switch to the basic operation screen or the video
monitor screen.
1)
. 1
In 1-in/1-out mode, press the REC/PB2 PORT button.
4
Chapter
53
Recording