Sony XDS-PD1000 Operation Manual page 110

Item number Item name
601 VITC POSITION
SEL-1
602 VITC POSITION
SEL-2
605 TCG REGEN MODE
607 U-BIT BINARY GROUP FLAG
610 REGEN CONTROL MODE
110
Setup Menu
Menu items in the 600s, relating to the timecode, metadata, and UMID
In 59.94i/59.94P/
a)
29.97P mode
In 50i/50P/25P
mode
In 59.94i/59.94P/
a)
29.97P mode
In 50i/50P/25P
mode
b)
Settings
Select the line into which to insert VITC signals (SD output)
12H to 16H to 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to "auto" and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to "auto" and
the VITC insertion line is set to line 20.
Select the line into which to insert VITC signals (SD output)
9H to 19H to 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
Select the line into which to insert VITC signals (SD output)
12H to 18H to 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to "auto" and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to "auto" and
the VITC insertion line is set to line 20.
Select the line into which to insert VITC signals (SD output)
9H to 21H to 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.
Select the user bits to be used in the timecode generated by the
timecode generator.
000:not specified [000]: Character set not specified.
001:iso character [001]: 8-bit characters compliant with ISO 646 and
ISO 2022.
010:unassigned-1 [010]: Undefined.
011:unassigned-2 [011]: Undefined.
100:unassigned-3 [100]: Undefined.
101:page / line [101]: SMPTE-262M page/line multiplex system.
110:unassigned-4 [110]: Undefined.
111:unassigned-5 [111]: Undefined.
Select whether the time code is automatically regenerated.
manual [manu]: The time code generator operates in accordance with
the TCG and PRST/RGN settings in the P4 TC page of the function
menu, regardless of whether the unit is acting as recorder or player.
assemble & insert [full]: When this unit is editing as a recorder, the time
code generator follows the time code played back from internal
storage.