Sony XDS-PD1000 Operation Manual page 142

Quantization 8 bits/sample
10 bits/sample
Compression MPEG-2 422P@HL
XAVC
1) PD2000 When the optional XDBK-106 is installed.
Composite outputs
Frequency response
0.5 to 5.75 MHz, +0.5/–2.0 dB
S/N (Y) 53 dB or more
Y/C delay ±20 ns or less
K-factor (K2T) 1.0% or less
Processor adjustment range
Video level –∞ to +3 dB
Chroma level –∞ to +3 dB
Set up/black level
±30 IRE/±210 mV
Chroma phase ±30°
System phase SYNC: ±15 µs
SC: 0 to +400 ns
Audio performance
Sampling frequency
48 kHz
Quantization 24 bits
Headroom –20 dB/–18 dB/–16 dB/–12 dB/–9 dB
(EBU level) (selectable)
Frequency response
20 Hz to 20 kHz, +0.5/–1.0 dB (0 dB at
1 kHz)
Dynamic range 90 dB or more
Distortion 0.05% or less (at 1 kHz)
Input connectors
Digital video inputs
HD/SD-SDI/DVB-ASI
BNC type (1)
SD-SDI input: complying with SMPTE-
259M
HD-SDI input: complying with SMPTE-
292M
DVB-ASI TS input
1) When the optional PDBK-202 is installed.
Analog video inputs
REF. VIDEO INPUT
BNC type (2) (loop-through), HD Tri-
level sync (0.6 Vp-p, 75 Ω, sync
negative), or SD black burst, SD
composite sync (0.286 Vp-p, 75 Ω,
sync negative)
142
Specifications
1)
1)
1)
INPUT
1)
Analog audio inputs
ANALOG AUDIO INPUT 1, 2
XLR 3-pin (2) female, +4 dBu, high
impedance, balanced
Digital audio inputs
DIGITAL AUDIO (AES/EBU) IN 1/2, 3/4, 5/6, 7/8
BNC type (4), channels 1/2, 3/4, 5/6, 7/8,
complying with AES-3id-1995
Timecode inputs
TIME CODE IN
BNC type (1), SMPTE timecode, 0.5 to
18 Vp-p, 10 kΩ, unbalanced
SYSTEM TC INPUT
BNC type (1), SMPTE timecode, 0.5 to
18 Vp-p, 10 kΩ, unbalanced
Output connectors
Digital video outputs
HD-SDI OUTPUT1 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
292M
SD-SDI OUTPUT1 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
259M
HD-SDI MONITOR/OUTPUT2 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
292M
SD-SDI MONITOR/OUTPUT2 1, 2 (SUPER)
BNC type (2), complying with SMPTE-
259M
HDMI OUTPUT
Type A 19-pin (1), HDMI version 1.1
MONITOR (VGA)
DE-15 (1), complying with VGA
standards
1)
DVB-ASI OUTPUT
BNC (1)
1) When the optional PDBK-202 is installed.
Analog video outputs
COMPOSITE OUTPUT 1, MONI/2
BNC type (2), 1.0 Vp-p, 75 Ω, sync
negative, complying with SMPTE-
170M
Analog audio outputs
ANALOG AUDIO OUTPUT1 1, 2
XLR 3-pin (2) male, +4 dBu, 600 Ω load,
low impedance, balanced
ANALOG AUDIO MONITOR/OUTPUT2 R/1, L/2
XLR 3-pin (2) male, +4 dBu, 600 Ω load,
low impedance, balanced
PHONES Stereo phone jack (1), –∞ to –13 dBu,
8 Ω, unbalanced