Sony XDS-PD1000 Operation Manual page 134

Alarm message in status
display area
No Support!
DISC frequency mismatch! RECORDING AND PLAYBACK IS NOT
1080/23.98P DISC
REC INHI.!
FORMAT NG!
DI read err
DRV ADJ err
Read err
BCA Read Error!
DISC Error
XDROOT Error!
BPAV Error!
During front panel operations
Alarm message in status
display area
KEY INHI.!
Not Open Clip!
Clip Top!
Clip End!
EDL Top!
EDL End!
134
Troubleshooting
Alarm message in video monitor screen Description/action
FORMAT NOT SUPPORTED.
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
POSSIBLE. SYSTEM SETTINGS
DIFFERENT FROM DISC.
DISC CANNOT BE RECORDED.
SYSTEM SETTINGS DIFFERENT FROM
DISC.
AUTO FORMATTING WAS NOT
COMPLETED. THE DISC WRITE
PROTECT TAB IS SET TO SAVE.
PLEASE EJECT DISC.
AUTO FORMATTING WAS NOT
COMPLETED.
CANNOT READ DISC INFORMATION.
PLEASE EJECT DISC.
CANNOT PERFORM AUTO DRIVE
ADJUSTMENT.
CANNOT READ DISC DATA. PLEASE
EJECT DISC.
CANNOT READ DISC BCA AREA.
PLEASE EJECT DISC.
DISC ERROR.
DISC NEEDS TO BE RESTORED.
USERDATA XDROOT ERROR.
USERDATA BPAV ERROR.
Description/action
This appears when the KEY INHI switch is "ON".
Set the KEY INHI switch to "OFF".
This appears when a clip operation is attempted with no clip selected.
Select a clip in the clip list screen and try the operation again.
During playback, this appears if you execute a reverse search when the unit is stopped at the first
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During playback, this appears if you execute a forward search when the unit is stopped at the last
frame of a clip. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
During EDL playback, this appears if you press the PREV button at the first frame of the first sub
clip of an EDL.
During EDL playback, this appears if you press the NEXT button at the last frame of the last sub
clip of an EDL.
This appears when a disc recorded in an
unsupported recording format has been inserted. Use
a disc that is supported by this unit.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide.
Replace the disc with one that is compatible with the
system frequency setting of this unit, or change the
system frequency setting of this unit.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide. Only pulldown playback is
possible.
Replace the disc with one that is compatible with the
system frequency setting of this unit, or change the
system frequency setting of this unit.
Set the Write Inhibit tab on the disc so as to enable
recording (see page 49).
Once eject the disc and then insert it again or insert
another disc.
The inserted disc requires to be restored.
Eject the disc, and restore it or format it on another
XDCAM device.
You cannot use clips in the UserData >XDROOT
folder.
You cannot use clips in the UserData >BPAV folder.