Sony SRR1000 Operation Manual page 61

1) 2)
Code Indication
1F01pp PORT x NO A13/A14 INPUT
(P-x NO A13/A14)
2001pp PORT x NO A15/A16 INPUT
(P-x NO A15/A16)
2101ss SLOT Mx REC INHIBIT
(Mx REC INHBIT)
2201ss SLOT Mx WRITE PROTECTED
(Mx WP SW ON)
2202ss SLOT Mx FS LOCKED
(Mx FS LOCKED)
2203ss SLOT Mx WRITE PROTECTED AND FS
LOCKED (Mx WP AND FS)
2901pp PORT x VPID MISMATCH BITDEPTH
(P-x VPID B-DP)
2A01pp PORT x VPID MISMATCH COLORSPACE
(P-x VPID C-SP)
2B01pp PORT x VPID MISMATCH LINK INFORMATION
(P-x VPID LINK)
2D01pp PORT x INVALID SDI DATA
(P-x INVLD SDI)
470100 RTC BATTERY LOW LEVEL
(RTC BATT LOW)
550100 VIDEO PLL UNLOCKED
(VID PLL UNLCK)
5901pp PORT x INPUT AUDIO DATA MISMATCH
32.000K
(P-x AUDIO FS)
5A01pp PORT x INPUT AUDIO DATA MISMATCH
47.056K
(P-x AUDIO FS)
7301pp PORT x NO REF INFORMATION
(P-x FLD INFO)
7401pp PORT x ASYNCHRONOUS VIDEO INPUT
(P-x ASYNC VIN)
8001pp PORT x 1035 VIDEO INPUT
(P-x 1035 V IN)
E101ss SLOT Mx FULL, NOT RECORDABLE
(Mx FULL)
E102ss SLOT Mx COND3 BAD, NOT RECORDABLE
(Mx COND3 BAD)
E103ss SLOT Mx FUNCTION LIMIT
(Mx FUNC LIMIT)
E104ss SLOT Mx NO FILE
(Mx NO FILE)
Meaning
No carrier detected on digital audio input on channel 13/
channel 14 for the indicated port.
No carrier detected on digital audio input on channel 15/
channel 16 for the indicated port.
A menu setting prevents recording to the card in the
indicated slot.
The write-protect switch on the SRMemory card is set to on
and prevents recording to the card in the indicated slot.
The SRMemory card in the indicated slot is locked and
cannot be recorded.
The SRMemory card in the indicated slot is write-protected
or locked and cannot be recorded.
The bit length in VPID of the input signal from the indicated
port does not match the system bit length.
The color space in VPID of the input signal from the
indicated port does not match the system color space.
Link data in VPID of the input signal from the specified
connector does not match the data of the connected port.
Note
In 3D systems, this warning appears only when 3D is
selected with the ALT/[F6] (VPID SEL) buttons in the
VIDEO menu.
The data of the SDI input signal is not valid.
The lithium battery on the SY-350 board is low on power.
PLL of the video clock generator is not locked to the video
reference signal.
The frequency of AUDIO input to the indicated port differs
from the unit frequency.
The frequency of AUDIO input to the indicated port differs
from the unit frequency.
Since there is no 30 frames/sec reference data for the 720/
59.94P HD SDI signal input to the indicated port, the signal
cannot be properly locked.
The HD SDI input signal at the indicated port is out of
phase by ±5H or more from the reference signal.
When system recording is set to 1080i, 1035i signal is input
to the indicated port.
The unit handles this input signal as 1080i.
Because SRMemory card in the indicated slot has no
space to use for recording, the record operation/command
for the SRMemory card was terminated.
Delete the files on the SRMemory card.
Recording is not possible because the space to replace the
bad memory cell is consumed on the SRMemory card in
the indicated slot. The recording operation/command was
terminated.
Replace it with a recordable SRMemory card.
Recording and playback operations for the SRMemory card
inserted in the displayed slot were canceled due to
restrictions on recording and playback.
There are no files that can be processed on the SRMemory
card in the indicated slot.
61
Troubleshooting