Sony SRR1000 Operation Manual page 45

Button Indication
ALT/[F5] TC2 SEL
ALT/[F7] CHAR SET
[F1]
POSITION
[F2]
SIZE
[F3] INFO SEL
[F4] TYPE
[F6]
WARNING
[F10] EXIT
ALT/[F9] META SET
[F1]
LINE1
[F2] LINE2
[F3]
LINE3
[F10]
EXIT
ALT/ CHAR ON
[F10]
Setting
Sets whether to use two lines for the time code display section and selects the time
code type for 2nd line when the screen is one-port display.
For input ports:
Off
TCG
TM1
TM2
UBG
For output ports:
Off
LTC
VITC
TM1
TM2
UBR
UBV
Sets the time code and other character information to superimpose on the signal
output from the MONITOR connector of SD/HD SDI. (see page 29)
Allows you to set the display position of character information with the cursor
buttons.
Sets the display size of character information.
Small
Medium
Sets the character information content for when ALT/[F10] (CHAR ON) is set to On.
Time (Timedata Only): Timer counter display information only
T&V (Timedata & VITC): Timer counter display information and VITC
T&T1 (Timedata & TM1): Timer counter display information and TM1
T&T2 (Timedata & TM2): Timer counter display information and TM2
T&UB (Timedata & UBIT): Timer counter display information and user bits
T&sta (Timedata & Status): Timer counter display information and operation status
Sets the background of character information.
Outl (Outline): White characters with black outlines
Trnsl (Translucent): White characters on a gray screen background
Wo/BG (Without BG): White characters with no background
W/BG (With BG): White characters on a black background
Sets whether to display a flashing warning message on the second line when an
item other than "Time" is selected with [F3] (INFO SEL).
Off
On
Redisplays the previous menu.
Sets uncompressed metadata.
Sets from which lines to acquire the uncompressed metadata.
In 1080 59.94i, 1080 50i, 23.98P/24P mode:
9H to 16H or 18H to 20H
In 720 59.94i/59.94P/29.97P, 720 50i/25P mode:
9H to 16H or 18H to 25H
Redisplays the previous menu.
Sets whether to superimpose the characters representing the time data and
operation status on the signal output from the SD/HD SDI MONITOR connector.
(see page 29)
Off
On
Target
I/O
Out
Out
Out
Out
Out
Unit
–
I/O
In
–
Out
45
Detailed Menu Description