Connector Panel; Time Code In Connector - Sony SRR1000 Operation Manual

Connector Panel

Port A
Port B
Port C
Port D
* At the time of shipment from the factory, no boards are
connected to ports A to C.
An output board is connected to port D.
A Input/output ports
There are the four ports A to D, and an input board or
output board can be connected to each of them. At the time
of shipment, an output board is connected to port D.
Explanations in this operation manual use the
configuration example of input boards (SRK-R201)
HD Input board (SRK-R201)
a HD SDI INPUT A/B connectors
Input the HD SDI video/audio signals.
b HD SDI INPUT MONITOR A/B/MULTI
connectors
Output the input signals for a monitor.
The MULTI connector currently cannot be used.
c TIME CODE IN connector
Inputs a time code generated by an external device.
A Input/output ports (see page 17)
B Remote input/output
section (see page 18)
connected to ports A and C and output boards (SRK-R202)
connected to ports B and D.
d TIME CODE OUT connector
When the time code generator is synchronized to the
external time code signals input via the TIME CODE IN
connector, this outputs the external time codes input via
the TIME CODE IN connector according to the ALT/[F3]
(TC OUT) button setting in the TC menu.
Outputs generated time code signals when the internal time
code generator is generating time codes.
e DIGITAL AUDIO INPUT (AES/EBU) connector
Input the audio signals in AES/EBU format for channels 1
to 16.
C Analog output/power supply
section (see page 19)
Connector Panel
17